DIN6334 nut connecting galvanized. M16, in a package of 2 pcs.
A nut of type DIN 6334 is used to extend, connect threaded rods and pins of the corresponding thread size in mechanical engineering, instrumentation and other industrial, manufacturing, and construction industries. The coupling nut has alternative names, such as “coupling”, “elongated nut”. Structurally made in the form of a hexagon with an internal hole in which a thread is cut. The length of the connecting nut is approximately equal to 3 times the diameter of the thread.
Install using a hex wrench. The nut is screwed to one end of the connected stud to half the length, after which the stud is twisted into the nut on the other side. For greater reliability of fastening, the connection can be fixed with additional nuts that tighten on both sides of the coupling. Thanks to the galvanized coating, the nut is protected against corrosion.
|Guarantee period of months.||3|
|Kind of nuts||Hex coupling|
|Per package||from 10 set|
|Standard (DIN, GOST)||DIN6334|
|Type of coverage||Galvanized|